Galvanized Tee, 8"
Gray Metal # 8-304-EZ
Galvanized tee in 26 gauge and with one crimped end. Minimize or Learn More more... |
Simpson Duravent Tee Support Bracket, 6"
Simpson Dura-Vent # 9072
Use to support the tee; suspended from a wall. Supports up to 35' of Duraplus chimney. Starter section built in. Install and use only in accordance with Dura chimney model DCR, SDP chimney installation and maintenance instructions. Residential type and building heating appliance chimney part. Minimize or Learn More more... |
Simpson Duravent Tee with Cap
Simpson Dura-Vent # 9067
Use for through the wall chimney installations. The tee-cleanout cap is removeable for easy chimney cleaning or inspection. Wall straps, a wall thimble and a tee support must be installed with the tee as directed. Tees have 1" insulating bracket. Ventilation air for chimney must be drawn from outdoors. Install and use only in accordance with Dura chimney model DCR, SDP chimney installation and maintenance instructions. Residential type and building heating appliance chimney part. Minimum clearance 2" air space to combustible materials and building insulation. Minimize or Learn More more... |
Tee, 6" x 6" x 6"
Gray Metal # 6-304-EZ
Galvanized tee in 26 gauge. |
Galvanized Stove Pipe Tee, 5" x 26 Gauge
Gray Metal # 5-304
|
Galvanized Stovepipe Tee, 7" x 26 Gauge
Gray Metal # 7-26-304
|
Galvanized Tee Joint, 6" x 6" x 6"
Gray Metal # 6-30-304
|
Galvanized Tee Joint, 8" x 8" x 8"
Gray Metal # 8-30-304
|
Galvanized Tee, 4" x 4" x 4"
Gray Metal # 4-304-EZ
|